IDX & MLS
How to Add MLS Listings to a Squarespace Website: IDX Options, Limits and Alternatives
Squarespace has no built-in IDX. Compare the 4 ways to show MLS listings on a Squarespace site, the plan you need, the SEO limits, and when to switch.

Introduction
Squarespace has no built-in IDX. To add MLS listings to Squarespace, you work with an IDX provider (a company that holds a listing feed from your board) and choose one of four routes: embedded widgets, a framed search page, a link to a search hosted elsewhere, or listing pages you build by hand. Squarespace IDX runs on custom code, and Squarespace's own guide starts with a Code block. Which route fits depends mainly on whether you want your listings to bring search visitors to your own site.
The plan rules and set-up steps below are from Squarespace's help centre, read on 19 November 2026.
⚡ Quick answer — does Squarespace have IDX? Not built in. Squarespace's guide says you add an MLS search with custom code from an IDX service, pasted into a Code block. JavaScript and iframes in a Code block need a Core, Plus or Advanced plan, or one of certain legacy plans. Squarespace does not support or guarantee third-party code.
Before you start
- Your MLS allows you to display IDX listings. That means membership and the board's approval. Most boards also charge for it; MLS and IDX fees by board quotes what boards publish.
- The provider covers your board. Ask in writing. A provider that supports Squarespace but not your board is no use to you.
- Your Squarespace plan allows the code the provider needs. The rules are below, and they differ for scripts, frames and site-wide code.
- Your domain loads over HTTPS. Browsers block insecure scripts and frames on a secure page, so the provider's code must be HTTPS too.
The four ways at a glance
| Method | How it works | Squarespace plan needed | Where the listing pages live | Typical effort |
|---|---|---|---|---|
| 1. Embedded IDX widgets | The provider's script draws search and listings inside your pages, through Code blocks | A plan that allows JavaScript in a Code block, and Code Injection if the provider needs a site-wide script | On your domain, drawn by the provider's script | An afternoon, plus testing |
| 2. Framed search page | An iframe shows the provider's search page inside one of your pages | A plan that allows iframes in a Code block | On the provider's site, shown in a frame | Under an hour |
| 3. Linked search | A menu link or button opens a search hosted on a subdomain or on the provider's site | Any plan: a link needs no custom code | On another address, opened by a link | Minutes, plus any domain set-up the provider asks for |
| 4. Manual listing pages | You build a page for each of your own listings with Squarespace's standard blocks | Any plan | On your domain, written by you | Per listing, and again whenever something changes |
- Embedded widgetWhere the listing page livesYour domain, drawn by a script
- Framed search pageWhere the listing page livesAnother site, shown in a frame
- Linked searchWhere the listing page livesAnother site, opened by a link
The addresses are examples. No verdict on search is implied: ask the provider how its listings are rendered.
Does Squarespace support IDX?
Only in one sense: it lets you paste a provider's code into your site. Its help article Adding an MLS search says you should be a member of an IDX service, names Diverse Solutions, IDXBroker and Displet as examples, and says most IDX services provide HTML embed code that you paste into a Code block. There is no Squarespace IDX plugin made by Squarespace, and no MLS feed inside the product.
Squarespace is also clear about where its responsibility stops. The same article says this customisation is outside the scope of its support, that it cannot guarantee the code will work or be fully compatible with Squarespace (including on mobile devices and on every template), and that it can cause display issues after future platform updates.
Which Squarespace plan allows IDX code
Squarespace states the plan rule in three places, and the three are not worded identically. Here is what each page says:
| Squarespace page | What it says about plans |
|---|---|
| Adding an MLS search | The steps add advanced code to a Code block, which it lists as available in the Core, Plus, Advanced, Business, Commerce Basic and Commerce Advanced plans |
| Code blocks | To add JavaScript or an iframe to a Code block, the site needs to be on the Core, Plus or Advanced plan |
| Premium features | JavaScript and iframes in a Code block are available in all trials, all Core, Plus and Advanced plans, and select legacy plans. They are not available in the current Basic plan |
Three more details from the Premium features page matter here:
- Every plan can put HTML, plain text, Markdown and CSS (inside style tags) in a Code block. The restriction is on JavaScript and iframes, which is what IDX code almost always contains.
- Legacy plans vary. Business, Commerce Basic and Commerce Advanced are older plan names that the MLS guide still lists. Squarespace adds that a site on an older Personal plan may have some of these features, depending on when it was signed up.
- Downgrading switches the code off. If a site moves to the current Basic plan, JavaScript or iframe code stays in the block but stops working, and the note saying so is shown only to you while logged in. Visitors just see nothing.
So check the plan name on your billing page against Squarespace's pages, not a provider's blog. Some provider pages still use the older plan names.
Method 1: Embedded IDX widgets
This is the route Squarespace's own guide describes. The provider gives you code, and the code draws a search box, results or a listing on your page.
- Choose an IDX provider that covers your board and documents Squarespace support.
- Get your MLS's approval. The provider normally starts the paperwork, and the board decides.
- Copy the embed code from the provider's dashboard.
- Open the page in Squarespace and click Edit.
- Add a Code block: hover over the section, click Add block (or +), then choose Code.
- Paste the provider's code. Leave the block in HTML mode. Squarespace says JavaScript only runs in HTML mode, wrapped in script tags.
- Save.
- View the page logged out. Squarespace warns that the code may not render while you are logged in.
- Test on a phone: run a search, open a listing and send yourself an enquiry.
What you paste is usually short: an empty container such as <div id="idx-search"></div> followed by one script tag that loads the provider's widget. That is a placeholder, not working code. Use exactly what your provider supplies.
Two providers publish Squarespace instructions of this kind (both read on 19 November 2026). iHomefinder's guide puts a script in Code Injection and widget code in a Code block, and describes the result as widgets on your pages with no iframes or subdomains. Buying Buddy's Squarespace page describes a JavaScript library added through Code Injection plus HTML snippets pasted into pages, and says no iframes are used. Those are each provider's own descriptions. For prices, see IDX Broker pricing and iHomefinder pricing.
Code block, Embed block or Code Injection?
Squarespace has three places that accept outside code. Your provider's instructions decide which you need.
| Where | What Squarespace says it is for | Plan rule | When IDX uses it |
|---|---|---|---|
| Code block | Custom code on one page, including third-party widgets. Limit of 400 KB per block | HTML on every plan; JavaScript and iframes as in the table above | The starting point in Squarespace's MLS guide |
| Embed block | Content from services that use the oEmbed standard, such as videos and social posts. For other code, Squarespace points you to Code blocks | Not stated on the pages read | Only if your provider specifically says so |
| Code Injection | HTML and scripts added to every page (header or footer) or to one page's header | Core, Plus, Advanced and some legacy plans, per its help article | When the provider needs one script loaded site-wide |
Method 2: A framed search page
An iframe is a box on your page that displays another web page inside it. Some providers give you a single line of iframe code for a complete search page. You paste it into a Code block, on a plan that allows iframes, and you are done.
It is the quickest route and easy to undo. The cost is that the search, the results and every listing are the provider's pages at the provider's address, shown through a window on yours. The address in the visitor's browser does not change between listings, so a single listing is awkward to share.
For search engines, be exact about what a frame is: another site's page displayed inside yours. Whether any of it is associated with your page is not something you control, and no provider can promise it. MLS plugin vs IDX widget vs direct MLS integration sets out Google's own wording on framed content.
Method 3: A linked IDX search on a subdomain
Here nothing is embedded. The provider hosts the search on its own address or on a subdomain of yours, such as search.yourname.com, and your Squarespace menu links to it. Because a link is not custom code, this works on any plan, including Basic.
It is a reasonable choice when your site's job is to show who you are and take referrals, when your plan does not allow scripts, or when you want something that cannot break your layout. The trade-off is plain: the visitor leaves your Squarespace site to search, and the listing pages sit at another address. Ask whether the hosted pages can carry your branding.
Method 4: Add your own listings by hand
If you carry a handful of listings, you can skip IDX for them. Build a page per listing with Squarespace's standard gallery, text, map and form blocks. Those are ordinary pages on your domain.
IDX is the arrangement for displaying other brokers' listings. Your own listings are yours to market, within your brokerage's and your board's advertising rules. The limits are practical: visitors cannot search the wider market, and you have to change the price and take the page down yourself.
Troubleshooting
- The search shows only when you are logged out. Expected: Squarespace says code sometimes does not appear while you are logged in. Use Preview in Safe Mode or a private window. Code may also fail to render inside an index page or with Ajax loading on.
- Your plan does not allow scripts. On the current Basic plan, JavaScript and iframe code stays in the block and does nothing.
- Mixed HTTP and HTTPS content. If the provider's code loads anything over plain HTTP, the browser blocks it on your secure page. Ask for HTTPS code.
- The provider blocks framing. Some sites refuse to be shown in a frame, and you get an empty box. Ask the provider for its supported embed method.
- The frame is cut off. A fixed height truncates long results or adds a second scrollbar. Set the height in the iframe code.
- Mobile clipping. Squarespace does not guarantee that third-party code is responsive. Test on a real phone.
- Style conflicts. The provider's styles and your template's can affect each other. Ask the provider to limit its styles to its own widget.
- Search works but the enquiry form fails. The form belongs to the provider, not Squarespace. Send a test enquiry and confirm where it arrives.
When the code still does not work, Squarespace's advice is to contact the service that gave you the code.
Questions to ask an IDX provider
- Do you hold a feed with my board today, and what does the board charge?
- On Squarespace, are listing pages drawn by a script on my domain, shown in a frame, or hosted on another address?
- What does a listing's web address look like, and can a visitor share it?
- Where do enquiries go, and can they reach my email or CRM without retyping?
- What are all the fees: monthly, set-up, board pass-through, extra users?
- How does the search behave on a phone inside a Squarespace template?
- Who do I call when it breaks, given that Squarespace will not support it?
How to add MLS listings to your website covers the board approval and testing steps in full.
What Squarespace can't do
Squarespace has no listing database and no connection to an MLS, so everything about listings comes from the provider you add. Four things follow from that:
- Listing pages at scale. Squarespace does not create a page per listing. Whether each listing has its own address on your domain depends entirely on the provider's method.
- Saved searches and alerts tied to a CRM. Where a provider offers them, the accounts and lead records live in the provider's system.
- Map search performance. A map search is the provider's script inside your template. Squarespace does not guarantee it.
- More than one MLS region. Covering two boards depends on the provider's feeds and each board's rules.
None of this is a fault in Squarespace. It is a website builder, and it says plainly that MLS search is a third-party addition.
How to check whether Google can see your listings
A two-minute test works on any of the four routes.
- Open one listing on your site, as a visitor would.
- View the page source. On a computer, right-click the page and choose View Page Source.
- Search the source for the listing's street address.
If the address is not in the source, the listing is loaded by a script or from another site. That does not prove Google cannot see it. It is the right question to put to your IDX provider: how is this listing rendered, and at whose address? Do not accept a promise that embedded listings will rank. No one can make it.
When to stay on Squarespace and when to move
| Your situation | Staying on Squarespace makes sense when | Moving is worth considering when |
|---|---|---|
| Number of listings | You have a handful of your own, or a simple market search is enough | You want the whole market searchable, with a page for every listing |
| Organic search | Your business comes from referrals and repeat clients, and the site is there to confirm who you are | You want listing and neighbourhood pages to bring in visitors from search |
| Lead follow-up | You answer a few enquiries personally | You need saved searches, alerts and each enquiry in a CRM with the visitor's activity attached |
For an agent with five listings and a referral-driven business, staying is often the right answer. If you are open to WordPress, WordPress IDX plugins compared is the next comparison, and the Wix, Squarespace and WordPress guide sets the three builders side by side.
The alternative: a site with MLS built in
RealFoyer does not plug into Squarespace. It is a hosted IDX website, MLS integration, CRM and AI marketing platform, so choosing it means replacing the Squarespace site.
RealFoyer has integrations with TRREB, through PropTx, and MLS PIN. A feed is activated for each agent after that agent's board approves it, and other boards are on the roadmap, so check the coverage list first. The plan on sale today is Starter, at $39 a month in US dollars or $49 in Canadian dollars; the other plans are on a waitlist, and the pricing page shows the current state. If your board is not on the list yet, ask us where it stands. Until it is connected, a provider that supports Squarespace is the practical route.
FAQ
Does Squarespace have IDX? Not built in. Squarespace's guide says you add an MLS search with custom code from an IDX service you belong to.
Can you add IDX to Squarespace? Yes, through an IDX provider that covers your board and supports Squarespace. The usual starting point is the provider's code in a Code block.
Which Squarespace plan allows IDX? Squarespace says JavaScript and iframes in a Code block are available on Core, Plus and Advanced plans, all trials and select legacy plans, and not on the current Basic plan. A linked search needs no code and works on any plan.
Is there a Squarespace IDX plugin? Squarespace has no plugin system of its own for this. What providers call a Squarespace IDX plugin is embed code you paste into Code blocks, sometimes with a script in Code Injection.
Will embedded listings rank on Google? No one can promise that. It depends on how the provider renders listings and at whose address. Run the view-source test and ask the provider.
Is Squarespace good for real estate agents? For a site that presents you, your areas and a few of your own listings, yes. For market-wide search with a page per listing and CRM follow-up, everything depends on the provider you add.
Does RealFoyer work with Squarespace? No. RealFoyer is a hosted platform that replaces the site. It does not integrate with Squarespace.
In short
Squarespace IDX is always a third-party addition. Squarespace gives you a Code block for a provider's code, limits scripts and frames to certain plans, and does not support or guarantee the result. The four routes each put the listing somewhere different, so ask the provider where its listing pages live, then run the view-source test. If the site is there to confirm who you are, stay. If it needs to produce search visitors and leads, compare a platform first.
Compare plugin, widget and platform or check whether your board is supported.
Related reading
- How to Add MLS Listings to Wix, Squarespace or WordPress
- How to Add MLS Listings to Your Website: The Actual Steps
- MLS Plugin vs IDX Widget vs Direct MLS Integration
- MLS and IDX Fees by Board (2026)
- WordPress IDX Plugins Compared (2026 Prices)
Research Integrity
Published 19 November 2026 for Squarespace-specific searches ("squarespace idx", "squarespace mls integration", "idx plugin for squarespace"). The set-up steps and every plan rule come from Squarespace's own help centre, read that day: "Adding an MLS search", "Add custom code to a page with code blocks", "Premium features", "Embed blocks" and "Customize parts of your site with code injection". Where those pages word the plan rule differently, each is reported separately instead of being merged into one rule. The descriptions of iHomefinder's and Buying Buddy's Squarespace set-ups are from each provider's own page, read the same day, and are reported as the provider's description; neither was tested. No provider is ranked and no provider's price is quoted here. The troubleshooting items other than those attributed to Squarespace are general web behaviour, not Squarespace statements. No method is described as counting or not counting for search, because that depends on how a provider renders listings; the view-source test shows where a listing is loaded from and nothing more. Nothing here promises a ranking or indexing. RealFoyer does not integrate with Squarespace, and is described only by its published Starter price, its waitlisted plans and its published board integrations.